AVR 460
The AVR460 receiver from Harman/Kardon is a fantastic home theatre addition. With automatic video upscaling, Dolby Volume control and HDMI repeater technology the system performs well above standard.
The receiver is equipped with all the means to create an ideal cinematic experience. The AVR460 is perfect for medium to large areas, with a variety of inputs including USB, finding the perfect place for it in your home is easy. The AVR 460 is A-Bus ready.
Specification
75 watts per channel into 8 ohms @ 20Hz – 20kHz, 0.07% THD both channels driven;
(seven-channel surround mode): 140 watts per channel into 6 ohms @ 1kHz, 1% THD, one channel driven;
60 watts per channel into 8 ohms @ 20Hz – 20kHz, 0.07% THD, all channels driven;
High Instantaneous Current Capability (HCC): ±35 amps
(seven-channel surround mode): 140 watts per channel into 6 ohms @ 1kHz, 1% THD, one channel driven;
60 watts per channel into 8 ohms @ 20Hz – 20kHz, 0.07% THD, all channels driven;
High Instantaneous Current Capability (HCC): ±35 amps
Tuner – Usable Sensitivity: IHF 1.3μV/13.2dBf;
THD at 1kHz with 100% modulation, (mono): 0.2%;
(stereo): 0.3%;
FM Adjacent Channel Selectivity: ±400kHz, 70dB;
Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB;
(stereo): 68dB
AVR 660
Power 75W x 7 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously
High-current (±50 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design
With four HDMI™ inputs, USB and iPod connectivity, Faroudja DCDi Cinema™ video processing, all the latest Dolby and DTS® audio modes, our own Logic 7® processing and the EzSet/EQ™ system for precise room calibration and Dolby® Volume technology that automatically adjusts volume levels when you switch between sources and channels, the AVR 660 is an unusually versatile performer – and its full-colour graphical interface makes it an exceptionally friendly one. The AVR 660 easily enables multi-zone audio setups. It automatically corrects annoying “lip sync” problems with both HDMI Lip Sync capability and manual A/V Sync Delay. Front-panel A/V inputs make video gaming more convenient (not to mention more exciting). And an eight-device learning and programmable remote puts all of the AVR 660’s capabilities at your fingertips.
Specification
Dolby TrueHD processing
• Logic 7® (5.1 and 7.1) processing
• Dolby Volume technology
• DTS®-HD Master Audio TM processing
• HDMI repeater with 1080p up-scaling
• Faroudja DCDi Cinema TM video processing
• EzSet/EQTM equalization
• iPod-ready
• HDTV-ready
• Component video inputs
• Quadruple-crossover bass manager
• RS-232 control connection
• Multi-room audio
• High-current capability
• 192kHz/24-Bit DACs
• USB input
• Internet radio
• Logic 7® (5.1 and 7.1) processing
• Dolby Volume technology
• DTS®-HD Master Audio TM processing
• HDMI repeater with 1080p up-scaling
• Faroudja DCDi Cinema TM video processing
• EzSet/EQTM equalization
• iPod-ready
• HDTV-ready
• Component video inputs
• Quadruple-crossover bass manager
• RS-232 control connection
• Multi-room audio
• High-current capability
• 192kHz/24-Bit DACs
• USB input
• Internet radio
Power 85W x 7 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously
High-current (±60 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design Surround Processing
Harman Kardon® is one of the audio industry’s most-powerful and most-capable companies, and the AVR 760 is the most-powerful and most-capable A/V receiver it makes. So it should come as no surprise that the AVR 760 does almost everything you can imagine – including automatically adjusting volume levels when you switch between sources and channels, thanks to new Dolby Volume technology. Two onboard 32-bit DSP processors deliver other essential Dolby and DTS technologies, including Dolby TrueHD and DTS-HD.
The latest version of our exclusive Logic 7 processing and Faroudja DCDi Cinema video
processing are included to make any source material look as great as it sounds. Whatever input you throw at it – HDMI, analog, component or S-video sources; computer-based audio via a direct USB connection or from thumb drives; or your iPod using our The Bridge II docking station – the AVR 760 can handle it. You can even use a broadband connection to access a wide range of Internet radio stations. And the AVR 760 easily enables multi-room video and audio applications with Zone II and A-BUS® technology. With a true 85 watts of power to drive each of seven channels, dual subwoofer outputs and the EzSet/EQ II system to precisely tune the system’s performance parameters to the acoustic requirements of your space, the AVR 760 is the ideal receiver to satisfy a houseful of entertainment needs.
No comments:
Post a Comment